PREZZO: 1.300€

Form: Stereo power amplifier

Output:

stereo: 200W+200W (Output power)

14.1VRMS (at the time of a 1-ohm load intensity)

20.0VRMS (at the time of a 2-ohm load intensity)

28.3VRMS (at the time of a 4-ohm load intensity)

40.0VRMS (at the time of an 8-ohm load intensity)

mono: 400W (Output power)

14.1VRMS (at the time of a 0.5-ohm load intensity)

20.0VRMS (at the time of a 1-ohm load intensity)

28.3VRMS (at the time of a 2-ohm load intensity)

40.0VRMS (at the time of a 4-ohm load intensity)

Output load impedance:

- stereo: 1 ohm, 2ohm, 4ohm, 8ohm

- mono: 0.5 ohm, 1ohm, 2ohm, 4ohm

Output-power band: 20Hz - 20kHz

THD (at the time of both ch(es) drive): 0.1% or less (Outputs 0.25W-200W, 20Hz - 20kHz)

Cross modulation distortion: 0.1% or less (at the time of an Output power)
Frequency characteristic (at the time of 1W output):

- 20Hz-20kHz+0 -0.25 dB

- 10Hz-100kHz+0 -3.0 dB

SN ratio: 95dB or more (at the time of an Output power)

Output voltage: 25V

Dumping factor:
stereo: 16 (at the time of a 1-ohm load intensity)

50 (at the time of a 2-ohm load intensity)

30 (at the time of a 4-ohm load intensity)

16 (at the time of an 8-ohm load intensity)

mono: 16 (at the time of a 0.5-ohm load intensity)

50 (at the time of a 1-ohm load intensity)

30 (at the time of a 2-ohm load intensity)

16 (at the time of a 4-ohm load intensity)

Input sensitivity/impedance: 0.75V, 2.5V/100kohm
The semiconductor used:

- Silicon transistor: 43 pieces

- Silicon diode: 24 pieces

- IC: Two pieces

Power source: 120V, 50Hz/60Hz

Power consumption:

- 70W (at the time of a non-signal)

- 550W (at the time of a maximum rating output)

Dimensions:

- Front panel: Width 407x177mm in height

- Main unit: Width 372x height 167x depth of 368mm

Weight: 33.1kg / 39.5kg (at the time of an original packaging)