Form: Stereo power amplifier
Output:
- stereo: 200W+200W (Output power)
14.1VRMS (at the time of a 1-ohm load intensity)
20.0VRMS (at the time of a 2-ohm load intensity)
28.3VRMS (at the time of a 4-ohm load intensity)
40.0VRMS (at the time of an 8-ohm load intensity)
- mono: 400W (Output power)
14.1VRMS (at the time of a 0.5-ohm load intensity)
20.0VRMS (at the time of a 1-ohm load intensity)
28.3VRMS (at the time of a 2-ohm load intensity)
40.0VRMS (at the time of a 4-ohm load intensity)
Output load impedance:
- stereo: 1 ohm, 2ohm, 4ohm, 8ohm
- mono: 0.5 ohm, 1ohm, 2ohm, 4ohm
Output-power band: 20Hz - 20kHz
THD (at the time of both ch(es) drive): 0.1% or less (Outputs 0.25W-200W, 20Hz - 20kHz)
Cross modulation distortion: 0.1% or less (at the time of an Output power)
Frequency characteristic (at the time of 1W output):
- 20Hz-20kHz+0 -0.25 dB
- 10Hz-100kHz+0 -3.0 dB
SN ratio: 95dB or more (at the time of an Output power)
Output voltage: 25V
Dumping factor:
- stereo: 16 (at the time of a 1-ohm load intensity)
50 (at the time of a 2-ohm load intensity)
30 (at the time of a 4-ohm load intensity)
16 (at the time of an 8-ohm load intensity)
- mono: 16 (at the time of a 0.5-ohm load intensity)
50 (at the time of a 1-ohm load intensity)
30 (at the time of a 2-ohm load intensity)
16 (at the time of a 4-ohm load intensity)
Input sensitivity/impedance: 0.75V, 2.5V/100kohm
The semiconductor used:
- Silicon transistor: 49 pieces
- Silicon diode: 45 pieces
- IC: Eight pieces
Power source: 120V, 50Hz/60Hz
Power consumption:
- 70W (at the time of a non-signal)
- 550W (at the time of a maximum rating output)
Dimensions:
- Front panel: Width 411.2x181mm in height
- Main unit: Width 381x height 166.7x depth of 368.3mm
Weight: 38.6kg / 44.0kg (at the time of an original packaging)